Lifting Archives - Page 3 of 5

Transportation and installation of a 113te reactor

Allelys have successfully completed the transport and installation of a 113te reactor for Frodsham substation. The reactor, measuring 6.5m (l) x 2.7m (w) x 4m (h) was received at Immingham port and transported to Frodsham using 12 axle lines of modular trailers.

Specialist transport of two 199te rotors and two 62te stators

Allelys have recently completed the delivery of two 199te rotors and two 62te stators for Keith Substation in Scotland.

Relocating a 92te armature

Allelys have successfully completed the relocation of a 92te Armature from Burntwood to Newport. The Armature, which had a 3m diameter, was required to be lifted with its wooden supports.

Removal of one of Birmingham’s iconic statues

Allelys have recently removed and transported one of Birmingham’s iconic statues. Affectionately known as the “Floozy in the Jacuzzi” but officially The River and Youth statues.

Lifting a 43te port drum engine

Allelys were contracted to lift the engine, manoeuvre it out of the manufacturing facility, transport it to Felixstowe and offload it at the docks, all within the same day.

Hornsea 2 offshore wind farm

Allelys played a key role in the Hornsea 2 project by delivering and installing 11 units including two 84te shunt reactors, three 135te transformers, three 208te reactors and three 240te transformers.

Delivery of a 185te transformer to Burwell

Allelys have recently transported, offloaded and installed a transformer weighing 184te. The cargo was received at Ipswich Docks onto a 12 axle flat top trailer and shunted to a temporary storage area.

Delivery of two historic boats

Allelys have provided the full service solution to offload, deliver and install four transformers, weighing 255te, at Dogger Bank Wind Farm.

Installation of 15 components for the Rassau project

Allelys were contracted to install fifteen components for the Rassau project. These components, when combined, form a synchronous condenser, which will add inertia and frequency stability to the power grid in the UK.

Dismantling of a 100te crane

Allelys were required to decommission and dismantle a 100te crane with a span dimension of 18.5m. The team utilised the Enerpac 900te lift system to dismantle the crane.

Excellence Delivered

Lets Talk...

We would love to hear more about the challenges you are facing. This form below will help us understand that project better and one of our experienced members of the team will be pleased to help you.

Case Studies